Fan Shroud - what ind of glue / adhesive?
#23
Uh, back to the topic...
Since we were just at the Duct Tape festival in Avon, OH over the weekend I'll say that might work, but I would personally use JB Weld, or regular old silicone. Silicone is a super adhesive. Or better yet some Ford Gray and those parts will never come apart.
...Or just pull the dang shroud off and be done with it, unless you are in a very hot climate all the time.
Since we were just at the Duct Tape festival in Avon, OH over the weekend I'll say that might work, but I would personally use JB Weld, or regular old silicone. Silicone is a super adhesive. Or better yet some Ford Gray and those parts will never come apart.
...Or just pull the dang shroud off and be done with it, unless you are in a very hot climate all the time.
__________________
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
'96 7.3 F-350 Reg Cab 4x4 - bought new.
'04 6.0 E-350 custom 4x4
'08 6.4 F-550 Reg Cab 6 spd 4x4
'17 6.7 F-250 KR ccsb 4x4
Thread
Thread Starter
Forum
Replies
Last Post
oldhard47
1987 - 1996 F150 & Larger F-Series Trucks
11
03-16-2018 06:41 PM
vol1966
1967 - 1972 F-100 & Larger F-Series Trucks
11
04-19-2010 11:31 AM
Big Hands
1948 - 1956 F1, F100 & Larger F-Series Trucks
18
04-30-2003 02:27 PM