well i got my shifter repair kit the new bushings and the 2 washers and pins and cover and put it in but know, there is no 3rd or 4th gear>.< 1st and second are fine no 3rd or 4th but 5th and reverse is fine. what could it be???? shift fork???

 

You need to pull the top cover off and have a look.

 

okayy, thats what i figured thanks

 

okayy so i pulled the top cover off the transmission today but before i did those three little caps closest to the bell housing about the size of pennies the middle one was popped out looked like it just happened??? but i pulled the cover off and was looking and the shift forks look like there wore slap out specialy the 3rd and 4th gear shift fork. i have pictures of everything but i dont know how to post them??? and i would rather have sombody else's openion on this cause this is the first time ive ever been in a transmission.

 

is there anybody that can let me know atleast what i need to look at

 

This might help.https://www.ford-trucks.com/forums/8...ift-forks.html Or the edge might be completely worn off.

 

thanks, i ordered the shift forks im just gonna replace them and hope its fixed