PLEASE HELP!!
Thread Starter
|
Freshman User
Joined: Apr 2012
Posts: 36
Likes: 0
PLEASE HELP!!
Just built a 71 400 motor and put it in a 79 pickup. I put it in time and tuned the carb. She would fire up as soon as you hit the key and idle till it ran out of gas. I got the truck out of the garage the other day and was testin the power on the black top. Had her walkin sideways in 3rd gear yeehaww. Anyway i pulled back into the garage and was about to shut it off then it stalled out itsself.Now when you start it you have to be on the gas, it will not idle and it backfires when you let off the gas. Too much money in this motor for it to sit around. Any thoughts?
Elder User
Joined: Aug 2011
Posts: 915
Likes: 0
From: Sweet home Alabama
How many miles did ya get on the motor? Was it a full rebuild? Sounds like a vacuum leak some where, Thats why you need to on the gas well starting it and it wont idol or the disturber moved.
Thread Starter
|
Freshman User
Joined: Apr 2012
Posts: 36
Likes: 0
It was a total rebuild.I went with the edelbrock performer intake and blocked offall vacume ports on the motor and intake. I played with the distributor a little bit.Anyway it could be a valve train problem?
Elder User
Joined: Aug 2011
Posts: 915
Likes: 0
From: Sweet home Alabama
Did ya over rev it? You should never hot rod a new engine nothing has time to seat, You may have bent a valve or a push rod.....A new engine you could of even broke the cam or a valve spring, Do a compression test,Pull the valve covers and check the push rods.
A compression test will tell you if its a valve.
A compression test will tell you if its a valve.
Senior User
Joined: Dec 2005
Posts: 348
Likes: 0
From: Hemet, California
Trending Topics
Elder User
Joined: Aug 2011
Posts: 915
Likes: 0
From: Sweet home Alabama
Now you found the problem.....Be gentile on it until you get at least 500 miles and change the oil filter at 100 miles then change the oil and filter at 500...Then go to normal fluid changes after that, Good thing it was an easy fix.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Posting Guru
Joined: Nov 2008
Posts: 1,647
Likes: 3
From: Halifx Pa
+1 on that!!
Thread Starter
|
Freshman User
Joined: Apr 2012
Posts: 36
Likes: 0
Thanks guys. And yes it was a total rebuild new bearings, bored, cammed all the goods and it is now my pride and joy lol. What would be the best type of oil and oil weight to be running in it at this time.
Hotshot
Joined: Apr 2009
Posts: 14,333
Likes: 247
From: Stanley, VA
What ever oil you do use be sure it's a quality oil and one with a high concentration of ZDDP (zinc dialkyl dithio phosphate). Thanks to the EPA all major oil companies have removed this additive from their oil formulas. This doesn't hurt engine with roller tappets but it is a death sentence for flat tappet cams like our trucks have.
You can have complete cam and lifter failure within a few hundred miles.
This is what your lifters could look like without ZDDP.
Thread
Thread Starter
Forum
Replies
Last Post
ColtonMullis
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Jan 20, 2014 03:53 PM
TailGater_73F100
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
4
Aug 26, 2009 10:11 PM
bryan_johnson
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
2
Dec 3, 2006 03:58 PM
rusty70f100
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
53
Apr 15, 2006 03:52 PM
