PCV Valve
Thread Starter
|
New User
Joined: Feb 2012
Posts: 19
Likes: 0
PCV Valve
Sorry for posting this, but on all the other threads, I wasn't able to find enough information to help with this issue.
I have a 97 F250HD 5.8l 351w. I am attempting to replace the PCV valve without removing the upper intake manifold, and was wondering if there is an easy way to do it. It feels as is the PCV valve has some kind of grommet preventing it from coming up off the valve, as it touches the bottom of the manifold.
Any suggestions would be awesome. And if it needs the intake to be removed, so be it.
Thanks!
I have a 97 F250HD 5.8l 351w. I am attempting to replace the PCV valve without removing the upper intake manifold, and was wondering if there is an easy way to do it. It feels as is the PCV valve has some kind of grommet preventing it from coming up off the valve, as it touches the bottom of the manifold.
Any suggestions would be awesome. And if it needs the intake to be removed, so be it.
Thanks!
Posting Guru
Joined: Mar 2010
Posts: 1,113
Likes: 1
From: Northern MN
Hard to get at on the 5.8
Shouldn't need to remove the upper intake, it's just in a tight place.
This might help you: How to replace PCV VALVE on 1995 ford F250 351 - YouTube
Shouldn't need to remove the upper intake, it's just in a tight place.
This might help you: How to replace PCV VALVE on 1995 ford F250 351 - YouTube
Thread
Thread Starter
Forum
Replies
Last Post
