When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I'm getting ready to replace the oil temp sensor. Can it be done without draining the oil and filter? I'd hate to pull it out, only to have oil gushing out of the port!
You could loosen the oil filter cap, the oil in the filter will drain out. Then do the sensor. I doubt much if any oil would come out. I haven't done this, so it's just a guess on my part.
You could loosen the oil filter cap, the oil in the filter will drain out. Then do the sensor. I doubt much if any oil would come out. I haven't done this, so it's just a guess on my part.