ipr question
Thread Starter
|
Posting Guru
Joined: Sep 2010
Posts: 1,329
Likes: 0
From: Grand Bay, Al
ipr question
i was just looking under my hood for anything since my pcm is on the way to dp for a flash..
is the plug on the ipr supposed to wiggle? the wire harness has the safety clip but the plug on the sensor itself moves
is the plug on the ipr supposed to wiggle? the wire harness has the safety clip but the plug on the sensor itself moves
Post Fiend
Joined: Mar 2007
Posts: 26,966
Likes: 50
From: Texas
The plastic plug should not wiggle and the wires coming off the plastic plug should not be chaffed. However, the solenoid (round body part with the other half that you plug into) does move around a little. Just check the nut on the back of the IPR and make sure you can't move it with your fingers and you should be fine.
Thread
Thread Starter
Forum
Replies
Last Post
ve7kilohertz
6.0L Power Stroke Diesel
6
Jun 20, 2012 10:19 PM
