302/351 exhaust
Thread Starter
|
Junior User
Joined: Jun 2004
Posts: 68
Likes: 0
From: Near Dallas, Texas
302/351 exhaust
Will 351 exhaust manifolds fit on a (88) 302 head.
Doing a 302 swap into my 57 F100 and I'm encountering crossmember and stock stearing box clearance problems. It looks like the exhaust manifolds from a 351W F150 might work if they will fit the head. (Crossmember cant be moved).
If you have any suggestions from personal experience, they would be appreciated. I would like to avoid trial and error parts searches and custom ($$$) headers.
FTE is a great resource but my searches have not been able to turn up an answer to my question.
Thanks in advance for any help in this matter.
Doing a 302 swap into my 57 F100 and I'm encountering crossmember and stock stearing box clearance problems. It looks like the exhaust manifolds from a 351W F150 might work if they will fit the head. (Crossmember cant be moved).
If you have any suggestions from personal experience, they would be appreciated. I would like to avoid trial and error parts searches and custom ($$$) headers.
FTE is a great resource but my searches have not been able to turn up an answer to my question.
Thanks in advance for any help in this matter.
Last edited by blue57; May 19, 2012 at 09:48 AM. Reason: poor wording
FTE Legend
Joined: Jun 2006
Posts: 31,930
Likes: 1,499
From: Ottawa, Ontario
Both motors(302 and 351) use the same heads so yeah the manifolds will bolt on no problem. Note that because of the frame and driveline truck manifolds tuck closer to the block than car manifolds/headers so that may be part of your problem if the 302 manifolds are from a car.
Thread
Thread Starter
Forum
Replies
Last Post
90F250351
1987 - 1996 F150 & Larger F-Series Trucks
15
Apr 25, 2007 08:28 AM
Bealzabubba
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
8
Dec 18, 2003 07:55 PM
blaxuede
335 Series- 5.8/351M, 6.6/400, 351 Cleveland
11
Feb 24, 2002 09:24 PM
