Dual quad Y block
Thread Starter
|
Laughing Gas
Joined: Aug 2010
Posts: 979
Likes: 40
From: Colorado Springs CO
Dual quad Y block
Dual quad Edelbrock intake for a 312! Cool!
IDK if it's worth the asking, but, hey, when's the last time you saw one?
intake for 1957 ford 312 other parts
IDK if it's worth the asking, but, hey, when's the last time you saw one?
intake for 1957 ford 312 other parts
Ford Parts Specialist
Joined: Nov 2006
Posts: 88,826
Likes: 785
From: Simi Valley, CA
1957 Ford's, T-Bird's and Merc's with 312's were available with factory installed dual quads (VIN engine code E) or w/a McCollough Supercharger (VIN engine code F).
Not only have I seen these parts, but cars with them installed. Late 1970's, found 6 NOS dual quad air cleaners for the Ford/Mercs in a junkyard. T-Bird's are different due to hood clearance.
Paid 200 bucks for all six, sold them for faaar more than that!
Not only have I seen these parts, but cars with them installed. Late 1970's, found 6 NOS dual quad air cleaners for the Ford/Mercs in a junkyard. T-Bird's are different due to hood clearance.
Paid 200 bucks for all six, sold them for faaar more than that!
Cargo Master
Joined: Apr 2003
Posts: 2,389
Likes: 58
I saw several on labor day weekend, at the NMRA Ford Expo in Columbus, Oh for the Y-Block shootout. 
Well, they may not have been Edelbrocks, though.
The ad is incorrect about the carbs the intake uses. Holley square bore carbs will not mount directly to it; they need adapters and fancy linkage. Here's one way to do it.
Well, they may not have been Edelbrocks, though.
The ad is incorrect about the carbs the intake uses. Holley square bore carbs will not mount directly to it; they need adapters and fancy linkage. Here's one way to do it.
Thread
Thread Starter
Forum
Replies
Last Post
71dusterdan
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
2
Sep 7, 2007 11:35 PM
novadragman2005
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
4
Jan 11, 2005 06:01 PM
Superdave
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
3
Jan 24, 2004 05:21 PM
