anyone know where I can get the speedo gear that goes on end of cable?

my 1961 Econoline 3 speed manual is reading about 5 mph too fast because of aftermarket wheels ( checked with a cool i-phone app!)

anyone got an idea how many teeth to change 1, 2 or?

 

United Speedometer Service
2431 University St, Suite B
Riverside, CA 92507
951-742-7117

 

Your Econoline has a nylon DRIVEN gear. 16 thru 21 teeth are available.

The same nylon DRIVEN gears are used from 1960 into the 1990's in myriad Passenger Cars/Trucks/Bronco's & Econolines. All are available from Ford for less than 5 bucks each.

Reading 5 MPH too fast: Count the number of teeth your gear has, then deduct a tooth. If you list the tooth count of your present gear, I'll give you the Ford part number/price for the one you need.

 

will do.....thanks Bill

 

Bill,
18 tooth yellow gear is in there now....
thanks Stuart

 

C3DZ-17271-C .. 17T DRIVEN Nylon Speedometer Gear (green or white) / Teeth run this-away \\\\ / Available from Ford.

MSRP: $4.83 // FTE sponsor tousleyfordparts.com price: $3.19 / At least 3 dealers in GA have it in stock (Dallas, Cleveland, Gainsville).

 

thanks Bill!