wheel ID longshot
Marmon-Herrington Man
Joined: Jul 2005
Posts: 11,986
Likes: 446
From: Central Illinois
Probably that's exactly what it is. The book shows that IHC Scouts and Jeeps shared the same 16" x 4.5" wheels having 5 lug x 5.5" pattern. K-H #31394 or Motor Wheel Corporation #33833. Can't say why they weren't, or couldn't be, used on Fords. Stu
Welder User
Joined: Feb 2009
Posts: 5,269
Likes: 50
From: northwest MT
A pic of one of the Jeep wheels.....looks kinda similar, but the one above almost looks like it has more offset? Kinda hard to tell...
Last edited by tinman52; Apr 2, 2012 at 06:43 PM. Reason: add words
Thread Starter
|
I'll have the Roast Duck
Joined: Jul 2002
Posts: 9,622
Likes: 110
From: Northshore, MN
What gets me is the long protrusion at the top of the wheel as pictured (4 of them altogether). It very well could be an early scout wheel, as 16" was an option in the early days..... I've just never seen one.
And scout wheel will fit a Ford, just not the other way around for certain Ford wheels, as the center hub hole isn't quite big enough for the IH dana hub.
And scout wheel will fit a Ford, just not the other way around for certain Ford wheels, as the center hub hole isn't quite big enough for the IH dana hub.
Marmon-Herrington Man
Joined: Jul 2005
Posts: 11,986
Likes: 446
From: Central Illinois
The Scout wheel is shown having about 3/4" of positive offset which is pretty much normal for singles. The two pictured are slightly different. Might be that one is the K-H, the other the M-W. Stu
Thread
Thread Starter
Forum
Replies
Last Post
Ezekiel7.25
1973 - 1979 F-100 & Larger F-Series Trucks
13
Aug 16, 2007 10:44 PM
