Wiring harness
Thread Starter
|
Junior User
Joined: Nov 2009
Posts: 52
Likes: 0
From: Spring branch
Wiring harness
I am looking to replace the complete harness in my 68 truck project. Everything I have found on line seems to be kinda of a half *** attempt at it. I doubt a dealer would have an OEM harness for that old a truck but want to stay as close to an "original copy" as possible. Anyone lead me in a direction? 
Lead Driver
Joined: Jan 2003
Posts: 9,893
Likes: 12
From: Ohio
Only decent attempt is something like Painless wiring. Comes with fuse panel and all wires marked and ready to go.
Unless you get lucky and someone scraps a truck with a good harness. I scrapped my '67 a couple years ago and sold the harness. It was perfect shape, no issues, no cuts, no splices. Front to back complete, don't recall what I got for it.
Try the "other site" and see if someone has something listed they are parting out. I found that that site is a bit more truck specific for these years. That is where I listed my truck and sold everything I posted.
Unless you get lucky and someone scraps a truck with a good harness. I scrapped my '67 a couple years ago and sold the harness. It was perfect shape, no issues, no cuts, no splices. Front to back complete, don't recall what I got for it.
Try the "other site" and see if someone has something listed they are parting out. I found that that site is a bit more truck specific for these years. That is where I listed my truck and sold everything I posted.
Thread
Thread Starter
Forum
Replies
Last Post
shakedog
Ranchero & 1961 - 1967 Econoline
3
Jul 28, 2008 10:57 AM
