Upfitter wires
Thread Starter
|
Senior User
Joined: Mar 2003
Posts: 118
Likes: 0
Upfitter wires
Hi Guys,
I recently took delivery of my 2012 F-150 and had an ARE canopy installed. In order to connect the 3rd brake light the shop ran a single wire from the rear of the truck to up under the hood and opened a factory wire bundle on the drivers side and tied into a wire that looks like it was previously blunt cut.
Does anyone know where to find a diagram and locations of blunt cut wires for future use? Could be handy to add some additional electrical accessories.
Thanks!
I recently took delivery of my 2012 F-150 and had an ARE canopy installed. In order to connect the 3rd brake light the shop ran a single wire from the rear of the truck to up under the hood and opened a factory wire bundle on the drivers side and tied into a wire that looks like it was previously blunt cut.
Does anyone know where to find a diagram and locations of blunt cut wires for future use? Could be handy to add some additional electrical accessories.
Thanks!
Thread
Thread Starter
Forum
Replies
Last Post
amexjoe
1968-Present E-Series Van/Cutaway/Chassis
4
May 25, 2012 11:47 AM
