So what did you do to your 6.0L today?
#1336
Not impaired just bored. Watched a video on coating parts & I had a spray can in basement that I use to waterproof my RC cars. My sons & I rc various radio control car year around. Still have not had time to upgrade all lights to HID but maybe Sunday. Nice thing about Plastidip is that it peels right off with no marks.
#1337
Join Date: Mar 2009
Location: North Bay Ont Canada
Posts: 161,183
Received 5,336 Likes
on
1,725 Posts
#1338
I gotta ask (its buggin me)...How do u have the Cab suspended
BTW...Love that "copper" color (i may be a little partial though)
#1339
Pulled my FICM and boxed it up to send to Ed.
Thanks FTE ! No problem working with the Air-intake parts in place either.
Piece of cake:
* Disconnected both neg battery terminals
* drained 1 GAL
* removed degas bottle, used a long screw driver to prop up the coolant hose so it wouldn't drip
* removed screws/plates on top of the FICM (f & r)
* reached under (left handed) and removed the connectors.
BTW - There is a flat plate on the rear of the FICM under the screws that falls to the ground once you pull the last back-side screw.
Thanks FTE ! No problem working with the Air-intake parts in place either.
Piece of cake:
* Disconnected both neg battery terminals
* drained 1 GAL
* removed degas bottle, used a long screw driver to prop up the coolant hose so it wouldn't drip
* removed screws/plates on top of the FICM (f & r)
* reached under (left handed) and removed the connectors.
BTW - There is a flat plate on the rear of the FICM under the screws that falls to the ground once you pull the last back-side screw.
#1340
Join Date: Mar 2009
Location: North Bay Ont Canada
Posts: 161,183
Received 5,336 Likes
on
1,725 Posts
#1341
#1342
I love the color of our trucks, and gosh dang it, I actually like this truck but after this we are strongly considering trading it and going a different direction I would like to stay with Ford but this experience has me shaken a little.
#1343
Ran her through the car wash today as she was a little muddy from yesterdays trip to Crown, MN to watch truck mud runs. It was a great time & my first ever to watch trucks in the mud + snowmobile water skips. I have done plenty of skippin' myself but it is always fun to watch. Videos to come + there was a 1,000hp alcohol truck that was plain insane to watch go over the mud. Below are a couple quick iphone pics. My videos will be using my camera & not my iphone.
#1344
Pulled my FICM and boxed it up to send to Ed.
Thanks FTE ! No problem working with the Air-intake parts in place either.
Piece of cake:
* Disconnected both neg battery terminals
* drained 1 GAL
* removed degas bottle, used a long screw driver to prop up the coolant hose so it wouldn't drip
Attachment 75764
* removed screws/plates on top of the FICM (f & r)
* reached under (left handed) and removed the connectors.
BTW - There is a flat plate on the rear of the FICM under the screws that falls to the ground once you pull the last back-side screw.
Attachment 75765
Thanks FTE ! No problem working with the Air-intake parts in place either.
Piece of cake:
* Disconnected both neg battery terminals
* drained 1 GAL
* removed degas bottle, used a long screw driver to prop up the coolant hose so it wouldn't drip
Attachment 75764
* removed screws/plates on top of the FICM (f & r)
* reached under (left handed) and removed the connectors.
BTW - There is a flat plate on the rear of the FICM under the screws that falls to the ground once you pull the last back-side screw.
Attachment 75765
Josh
#1345
Join Date: Mar 2009
Location: North Bay Ont Canada
Posts: 161,183
Received 5,336 Likes
on
1,725 Posts
#1346
Join Date: Mar 2009
Location: North Bay Ont Canada
Posts: 161,183
Received 5,336 Likes
on
1,725 Posts
#1347
#1348
#1349
#1350