2000 excursion front axel problems
Thread Starter
|
New User
Joined: Feb 2012
Posts: 2
Likes: 0
2000 excursion front axel problems
I have a 2000 ford excursion limited when i drive a loud clunking noise comes from the front end, so i pulled the front passanger tire off and realized what looks like the axel bearing behind the hub assembly is ratteling around. I was wondering if anybody knew what part that it is or if anybody had the same problem. I am going to post a picture tomorrow in the day light. If anyone has anything thaty can help that would be great.
Thanks, Steve
Thanks, Steve
New User
Joined: May 2011
Posts: 12
Likes: 0
Hello Steve,
That hub/bearing unit is a one piece unit. When the bearing goes bad you have to replace the whole unit. Probably about $600 for the part. Have you serviced the ball joints recently? I put a Dynatrac free spin kit on my Excursion when the ball joints needed replacing. Cost a bit, but when I recently replaced my bearing again it cost me $27.
That hub/bearing unit is a one piece unit. When the bearing goes bad you have to replace the whole unit. Probably about $600 for the part. Have you serviced the ball joints recently? I put a Dynatrac free spin kit on my Excursion when the ball joints needed replacing. Cost a bit, but when I recently replaced my bearing again it cost me $27.
Thread
Thread Starter
Forum
Replies
Last Post
Dhyme
Brakes, Steering, Suspension, Tires, & Wheels
2
Mar 2, 2018 08:41 AM
CSBaldwinAssoc
Excursion - King of SUVs
5
Sep 2, 2007 12:06 AM
