What I thought was a 400M turned out to be a 351C. I dissassembled it last Saturday. I don't use the truck enough to do a full rebuild (which it needs) so, I have a small bell housing T18 this lets me use a 351W or 302.
Anybody have anything near Toronto?
Any interest in the 351C?
Can anybody tell me if the clutch pivot is really required on the block, and is a hole present for it on a 302 block.
Thanks
Pete Roy

Phone # edited out by moderator

 

Hi Pete,
I think I know a guy who could use the 351C and might be able to help you out with a motor. Would it be alright by you if I passed along your information to him?
Cheers!
Alex

 

The 351 is dis-assembled.
Please pass my name and info on to him.
I'd love to get a motor, so that I can install it this Saturday.
Thanks

 

Hi Again Pete -

Have not yet been talking to the fellow I know - haven't seen him around, but I've been swamped with other stuff. At any rate, I came back here to get your number, as I had mis-placed it, but I noted it had been removed. Send me a Private Message with your number and I will see what I can do.
Cheers,
Alex

 

Thanks, I sold the C for $200 in pieces bought a 351W core for $100, rebuilt it, it is in the truck as of Sunday, just 3 minor things to finish and run it tonight.
Thanks

 

K.
Sounds like you made out ok.
Best of luck!