Ranger Gear Ratios
Thread Starter
|
Freshman User
Joined: Mar 2003
Posts: 39
Likes: 0
Ranger Gear Ratios
Hi everyone, I have a 94 4x4 ranger with a 4.0 L engine. I'm planning on lifting it up 6 inches this summer and putting on 35's. I'm stumped as to what gears I should get. I'm deciding between the 4.11's or the 4.56's I want half way decent mpg but I still want some power. Is there a big difference between these gears ? Tell me what you think
Senior User
Joined: Aug 2001
Posts: 380
Likes: 0
From: Illinois
Ranger Gear Ratios
There is not a huge differance in the gears, but if you are going to spend the money, 4.56s would be better in the long run with 35" tires. They will also get you closer to your stock RPM range.
Elder User
Joined: May 2002
Posts: 818
Likes: 0
From: northeastern ohio
Ranger Gear Ratios
They use 4.10's with 30.5 inch tires.(what my 2002 ranger came with)
I would use 4.56(min) or 4.88's with 35's.
The whole point is not doing it twice because its about 400-500$ an axle to change (parts+labor)
Rand
I would use 4.56(min) or 4.88's with 35's.
The whole point is not doing it twice because its about 400-500$ an axle to change (parts+labor)
Rand
Thread
Thread Starter
Forum
Replies
Last Post
Johnlwlr
1999 - 2016 Super Duty
18
Mar 11, 2011 12:42 PM
CheaperJeeper
Offroad & 4x4
11
Feb 17, 2008 06:30 PM
WXboy
Clutch, Transmission, Differential, Axle & Transfer Case
3
Dec 5, 2002 05:17 PM
