c6 help!
Thread Starter
|
New User
Joined: Mar 2002
Posts: 13
Likes: 0
From: Keizer USA
c6 help!
I have been have a vacuum problem, so I did like any other guy would start pulling vacuum line and moving them around, Now my Tranny wont shift. Please help, where would the vacuum line go, 86 351 c6 tranny.
Thank you'
Tim
Thank you'
Tim
Senior User
Joined: Apr 2003
Posts: 448
Likes: 0
From: Edmonton, AB Canada
c6 help!
I believe that your problem is a mere coincidence because your transmission doesnt shift using vacuum prearsure. What you could have done is removed the tranny kick down lever, and it is a real possibility that you screwed up the shift rods and levers some how, but not by playing with vacuum lines
Junior User
Joined: Feb 2003
Posts: 60
Likes: 0
From: Raleigh, NC
c6 help!
Actually, the tranny does rely on vacuum to determine shift points. This is controlled by the vacuum modulator.
I'm sure you disconnected the VM during your troubleshooting - or, you hooked it up to a source that does not provide manifold vacuum.
The tranny won't shift out of first if the VM is disconnected.
I'm sure you disconnected the VM during your troubleshooting - or, you hooked it up to a source that does not provide manifold vacuum.
The tranny won't shift out of first if the VM is disconnected.
Thread
Thread Starter
Forum
Replies
Last Post
tim37
1973 - 1979 F-100 & Larger F-Series Trucks
4
Dec 28, 2014 06:06 PM
elkarcher1716
1973 - 1979 F-100 & Larger F-Series Trucks
13
Mar 20, 2013 10:06 AM
timothy47129
1973 - 1979 F-100 & Larger F-Series Trucks
8
Nov 25, 2006 04:28 PM
