Chassis
Thread Starter
|
New User
Joined: Nov 2011
Posts: 16
Likes: 0
Chassis
I was wondering if anyone on here has a 53 - 56 f100 mounted on a tci chassis if so could you please tell me how high the truck sits off the ground and what size wheels you are running thank you
Allan
Allan
Posting Guru
Joined: Dec 2008
Posts: 2,352
Likes: 1
From: Waleska, GA
I have a TCI chassis with the 2" drop spindles in front. I have a set of "rollers" off of a Ford Explorer. I really thought I'd go with a smaller diameter tire, but my front bumper is currently only about 12" off of the ground and my mufflers were dragging in my gravel driveway. I'll probably run it this way until I get a good idea if and how much lower I want to go. The Mustang GT tire (I think it's a 245-45-17(or maybe 18?)) that I have to compare the Explorer tires to, is at least 3" less in diameter (1.5" to 2" more of a drop) if I decide to go that route.
Thread Starter
|
New User
Joined: Nov 2011
Posts: 16
Likes: 0
Thanks for the reply I have their complete ifs with regular height spindles with the adjustable 4 link with coilovers on the back and plan on running 18s in the front and 20s on the back but would like the front bumper to be about 8 inches off the ground. Any more input would be great thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Chicken Chaser
Brakes, Steering, Suspension, Tires, & Wheels
3
Mar 18, 2003 08:01 PM
