Ignition coil connector (plug)

Reply Subscribe

Thread Tools

Search this Thread

Nov 6, 2011 | 09:49 AM

mkoempel

Thread Starter

Junior User

Joined: Jan 2009

Posts: 91

Likes: 0

From: Dirty Jersey

Ignition coil connector (plug)

I have 2 coil connectors (plug) that do not stay plugged in. The little plastic tab is broken. I was wondering if it would be easy to replace the plug ( wire harness side).. I currently have electrical tape holding them together. It was a quick fix so I can get home. I'm thinking of using zip ties to hold them to the coil but I would like if easily possible to replace them. Granted one of the bad connectors is #4 ( not easy to get to what so ever ) and then # 5.
Any other ideas on how to fix or get by would be greatly appreciated.

Nov 6, 2011 | 02:27 PM

galaxie641

Postmaster

Joined: Nov 2006

Posts: 4,517

Likes: 3

From: SE Wyoming

Buy a bare plug, the wires should just pull out of the broken one, now where to get a plug I don't know. Ford should have them but who knows what they would want for them.