Iv posted elsewhere that I had an idea to swap in the 7.3 IDI. The factory gauges have been said to lack reliability so my question is. Can someone send my measurements of the factory gauge openin? I want to leave the bezel un-cut but replace the gauges with aftermarket everthin. To start I was thinkin of offsettin the speedo from center. Runnin 2 3/8 diesel tach, fuel, temp, charge, and oil. If there is any more room in the gauge bezel area Id also like to run boost and such as necessary. Even the factory gauge sizes would help me plan this. Thank you.
http://www.autometer.com/cat_gaugede...id=3254&sid=12