Trailer brake control
Thread Starter
|
Elder User
Joined: Aug 2009
Posts: 946
Likes: 0
From: Clearfield County, PA
i used a 20 amp circut breaker to power the brake controller. Something akin to this: In-Line Circuit Breaker - 20 Amp - Perpendicular Mount Bracket Pollak Accessories and Parts 9506P
Then of course i had to tap into the brake on/off switch and then run a wire to the 7-way plug.
Check your brake controller instructions for the fusing requirements. 20amp was right for mine, yours could be different.
Then of course i had to tap into the brake on/off switch and then run a wire to the 7-way plug.
Check your brake controller instructions for the fusing requirements. 20amp was right for mine, yours could be different.
Thread
Thread Starter
Forum
Replies
Last Post
gogreenwave
1983 - 2012 Ranger & B-Series
6
Apr 16, 2012 09:38 AM
steveraymond
1999 - 2016 Super Duty
7
Oct 7, 2010 04:14 PM
old farmer
Explorer, Sport Trac, Mountaineer & Aviator
5
Feb 4, 2009 10:01 AM
