Nut and spindle spinning
Senior User
Joined: Dec 2010
Posts: 188
Likes: 0
Obtain a big Vise-Grip type locking pliers.
Grip the top of the tie rod and the bottom of the spindle, and lock the two together with the Vise-Grips.
This will re-compress the tapered stud back down into the spindle and lock it in place for you.
Grip the top of the tie rod and the bottom of the spindle, and lock the two together with the Vise-Grips.
This will re-compress the tapered stud back down into the spindle and lock it in place for you.
Thread
Thread Starter
Forum
Replies
Last Post
mrjay62
1999 - 2016 Super Duty
10
Oct 16, 2010 04:02 PM
