When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have a 2005 6.0L with blowed head gaskets pulled heads and found 3 cylinders scored and 1 piston looks bad where can I get a good rebuild kit? needs bored .30
i would find a used engine if it was me and tear it down and stud it. thats what i did it was much easier but then again you might have way more expirence than me with rebuilding motors
used engine is still big money 3-4k.. machine shop would be about the same with a warranty for 12 months maybe up to 5k with head work i would know what i have with the rebuild rather than a junk yard used engine
Rezvani's Latest Post-Apocalytic Monster Is a Ford F-150 Raptor Underneath
Slideshow: Called the Fortress, the 850-horsepower pickup combines Raptor underpinnings with military-inspired features, survival equipment, and a starting price of $285,000.
