Coilover reinstall - need some help
Thread Starter
|
5th Wheeling
Joined: Sep 2008
Posts: 29
Likes: 0
Coilover reinstall - need some help
I replaced one of my UCAs this weekend. Tore the upper ball joint boot when replacing the IWEs and just got the Moog UCA with the replaceable ball joint. My issue during reassembly came with the coilover. I could not get the stem of the shock/strut up high enough to be able to reinstall the rubber isolator. I ended up being able to get the large flat washer and nut back on, so I'm safe there, but want to avoid the rattles I'm sure I'll end up with down the road. Any advice?
Bushing/Isolator
Where it goes
Bushing/Isolator
Where it goes
Last edited by friscofordguy; Jul 31, 2011 at 09:03 PM. Reason: bad links
Thread
Thread Starter
Forum
Replies
Last Post
jruggles
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
3
Feb 28, 2013 05:20 PM
locked up
1999 - 2016 Super Duty
6
Jul 7, 2011 07:16 PM
LS1 Powered
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
6
May 12, 2007 06:05 PM
thisoldtruck
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
10
Apr 13, 2007 03:47 PM
