what's it worth?
Thread Starter
|
Senior User
Joined: Jul 2011
Posts: 274
Likes: 0
From: NEPA
what's it worth?
..what do you think the cab is worth on this 2wd f350? the bed etc?
Apparently the only thing wrong with the truck is the reverse in the trans doesn't work. I know it's just one picture but..what should I pay for this truck?
Apparently the only thing wrong with the truck is the reverse in the trans doesn't work. I know it's just one picture but..what should I pay for this truck?
Thread Starter
|
Senior User
Joined: Jul 2011
Posts: 274
Likes: 0
From: NEPA
I'm in eastern, PA. Scrap is at $.14/lb...but the nearly rust-free cab n bed really aren't worth much huh? Okay, thanks for the input guys.
He's asking $900...but I'm only looking for a turn investment..
He's asking $900...but I'm only looking for a turn investment..
Senior User
Joined: Feb 2002
Posts: 134
Likes: 0
From: Idaho
I've seen the tool box bed go for $200 cut out.
Tubs just depend on who's looking when you are selling.
The thing with parting a truck is some parts will go quick, others you might sit on for a while.
The race track trim is worth $$ to someone building/restoring a supercab.
Glass sells, but not quickly.
Pull all the small stuff and scrap for weight.
You'd get a quicker turn IMO if you shot it single stage paint and dropped another tranny in it.
Tubs just depend on who's looking when you are selling.
The thing with parting a truck is some parts will go quick, others you might sit on for a while.
The race track trim is worth $$ to someone building/restoring a supercab.
Glass sells, but not quickly.
Pull all the small stuff and scrap for weight.
You'd get a quicker turn IMO if you shot it single stage paint and dropped another tranny in it.
Thread Starter
|
Senior User
Joined: Jul 2011
Posts: 274
Likes: 0
From: NEPA
I agree, I don't want the stuff sitting around forever..I have 2 '79 F350s I'm parting out now..and I haven't gotten any bites on anything. I can't post them in the classifieds here yet either til I have enough posts. 
Not sure how the frames looks, as truck is 4.5 hours away..I was going to ride there on my streetbike, load it in the back and drive it home. lol. I was thinking that would be the way to go, fixing the tranny, selling the toolbox and truck seperate..
Not sure how the frames looks, as truck is 4.5 hours away..I was going to ride there on my streetbike, load it in the back and drive it home. lol. I was thinking that would be the way to go, fixing the tranny, selling the toolbox and truck seperate..
Trending Topics
Tuned
Joined: Mar 2011
Posts: 320
Likes: 0
Well then get to posting. Here's an opening for one more. Selling parts doesn't seem to go as easily as selling a whole truck. That said, if you have any good green interior pieces shoot me a PM. Also looking for a non-cruise control horn bar in black if you have a good one.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
Thread Starter
|
Senior User
Joined: Jul 2011
Posts: 274
Likes: 0
From: NEPA
Unfortunately no green interiors...not sure exactly what you mean by horn bar though..? Might be able to help ya on that one..not sure.
The beds I currently have aren't dentsides. How much do you think you would pay for the bed pictured above?
And I am in Schnecksville, PA 18078. About 10-15 minutes northwest of Allentown.
I have good hoods, glass grills etc..drivetrain too.
((I do have a complete set of new BFG mud terrains on (sandblasted & painted) 8 lug black steel wheels, 33x12.50R16.5 if interested. Those are more pricey at $800..))
The beds I currently have aren't dentsides. How much do you think you would pay for the bed pictured above?
And I am in Schnecksville, PA 18078. About 10-15 minutes northwest of Allentown.
I have good hoods, glass grills etc..drivetrain too.
((I do have a complete set of new BFG mud terrains on (sandblasted & painted) 8 lug black steel wheels, 33x12.50R16.5 if interested. Those are more pricey at $800..))
Thread
Thread Starter
Forum
Replies
Last Post
joelsdelone
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
202
Mar 31, 2017 10:46 AM
rmk73
1961 - 1966 F-100 & Larger F-Series Trucks
13
Feb 9, 2013 09:28 PM
Blueovals&Blacksmoke
Pre-Power Stroke Diesel (7.3L IDI & 6.9L)
24
Jul 16, 2010 09:07 PM
keith56_cruz_cab
1948 - 1956 F1, F100 & Larger F-Series Trucks
28
Jun 8, 2008 11:25 PM