engine mounts
Thread Starter
|
New User
Joined: Jun 2011
Posts: 22
Likes: 0
engine mounts
How hard is it to change motor mounts. Got on busted on passenger side. Truck is 4x4 with 460 and c6 tyranny. I also have a chattering transfer case. I believe its a np 1345 and it leaks at the rear seal and the bearing has some play in it. I'll get the numbers off the case tag and post them tomorrow.
Moderator
Joined: Jan 2001
Posts: 56,984
Likes: 2,738
From: Virginia
Cut a board that goes out to the edges of the oil pan. Take the bolts out of the mounts and jack the engine up using the board. Replace the mounts. Just make sure the board goes out to the edge of the oil pan. The vertical edge is very strong, but the flat part of the pan is weak.
Thread
Thread Starter
Forum
Replies
Last Post
btravis90
1973 - 1979 F-100 & Larger F-Series Trucks
1
Feb 16, 2012 08:03 PM
dynamic
1973 - 1979 F-100 & Larger F-Series Trucks
9
Jul 22, 2005 08:40 AM
