Question on 5.4 interchangability
Thread Starter
|
New User
Joined: Jun 2011
Posts: 3
Likes: 0
Question on 5.4 interchangability
Hi guy's, I'm new to the mod motor's so I have some questions. The truck we have is a 99 E150 5.4 "L" - Friday it developed a VERY serious rod knock. I do know that this is a 2V. In looking for replacement motors we're finding quite a few of the newer 3V motors with less miles & cheaper too! Other than the obvious head/cam/intake changes are there any other differences? Is it easily swapped? What other parts (computer/harness) would be needed for the swap? I just want to get as much info as I can before we buy something we don't need or can't use.
Thanks,
Dave
Thanks,
Dave
Moderator
Joined: Dec 2001
Posts: 22,436
Likes: 17
From: Louisville,Ky.
Complete harness, pcm etc would be needed, the exhaust won't batch up, the throttlebody is in a different location and drive-by-wire and you will need the matching transmission because they are differnt as well. Quite a PITA really.
Moderator
Joined: Dec 2001
Posts: 22,436
Likes: 17
From: Louisville,Ky.
Good thing she checked!! I don't know if the van in 99 got the PI heads or not. If so, 99-03 will work. Look at the head like in the picture of my 01 I has to see if it has PI on the head.
https://www.ford-trucks.com/user_gal...137666&width=2
https://www.ford-trucks.com/user_gal...137666&width=2
Thread
Thread Starter
Forum
Replies
Last Post
STEVARONEE
1997 - 2006 Expedition & Navigator
1
Jan 11, 2011 08:25 AM
