Replacing shocks...
Thread Starter
|
Tuned
Joined: Jun 2002
Posts: 315
Likes: 0
From: Interior of BC,Canada
Replacing shocks...
Hi guys!
I just picked up new shocks.
2 Front and 2 Rear
What's the procedure for swapping them out?
Do I just jack 1 side up (floor jack),loosen the top bolts then the bottom bolt and knock it out??
Does the new 1 just slip into place?
Do I get it fully bolted before releasing the shock?
I just picked up new shocks.
2 Front and 2 Rear
What's the procedure for swapping them out?
Do I just jack 1 side up (floor jack),loosen the top bolts then the bottom bolt and knock it out??
Does the new 1 just slip into place?
Do I get it fully bolted before releasing the shock?
Cargo Master
Joined: Feb 2010
Posts: 3,493
Likes: 3
From: NY
You don't have to jack the truck up(I didn't). Just take m' out, lol.
To put them back don't cut the wire holding it compressed until you have one bolt in, then cut the strap and get the bolt in before it can full extend.
To put them back don't cut the wire holding it compressed until you have one bolt in, then cut the strap and get the bolt in before it can full extend.
Post Fiend
Joined: Feb 2009
Posts: 8,005
Likes: 7
From: Ottawa, Ontario
Took me 20 min (had to heat the front shock bolts) on my F150 to do all 4 shocks.
All 4 were original, damn thing rode like a Caddy!
Now....rides like a truck again....
All 4 were original, damn thing rode like a Caddy!
Now....rides like a truck again....
Trending Topics
Thread Starter
|
Tuned
Joined: Jun 2002
Posts: 315
Likes: 0
From: Interior of BC,Canada
Front 1's were easy enough.
The plastic tie-back was broken on 1 so it was a little tougher but no big deal.
Also,I did afterall jack it up and removed the tires.
Way easier with them out of the way.
Just backed the truck in the shop and I'm going after the rear 1's now
The plastic tie-back was broken on 1 so it was a little tougher but no big deal.
Also,I did afterall jack it up and removed the tires.
Way easier with them out of the way.
Just backed the truck in the shop and I'm going after the rear 1's now
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
Thread Starter
|
Tuned
Joined: Jun 2002
Posts: 315
Likes: 0
From: Interior of BC,Canada
Nope!
Can't remove the lower nut
I didn't buy replacement bolts so I can't hack it off
My propane bottle is empty so can't apply any heat
And I don't have the right socket...
19mm too big
3/4" too big
11/16 too small
17mm too small
Don't have an 18mm for some reason
I'll drench it in ATF and let it soak overnite try again in the morning.
Can't remove the lower nut
I didn't buy replacement bolts so I can't hack it off
My propane bottle is empty so can't apply any heat
And I don't have the right socket...
19mm too big
3/4" too big
11/16 too small
17mm too small
Don't have an 18mm for some reason
I'll drench it in ATF and let it soak overnite try again in the morning.
Junior User
Joined: Oct 2010
Posts: 77
Likes: 0
From: Erie, PA
Nope!
Can't remove the lower nut
I didn't buy replacement bolts so I can't hack it off
My propane bottle is empty so can't apply any heat
And I don't have the right socket...
19mm too big
3/4" too big
11/16 too small
17mm too small
Don't have an 18mm for some reason
I'll drench it in ATF and let it soak overnite try again in the morning.
Can't remove the lower nut
I didn't buy replacement bolts so I can't hack it off
My propane bottle is empty so can't apply any heat
And I don't have the right socket...
19mm too big
3/4" too big
11/16 too small
17mm too small
Don't have an 18mm for some reason
I'll drench it in ATF and let it soak overnite try again in the morning.
Sound like my week, nothing seemd to work. Nothing would come off of Leaf springs. Ground hanger rivits to nothing and would not pop, hanger refused to come off
Wife got tired
and broke down and let me get a compressor and Air tools
Life is once again great, maybe, She suggested a nail gun also, must have a project in her mind
Thread
Thread Starter
Forum
Replies
Last Post
Peavey1986
1980 - 1986 Bullnose F100, F150 & Larger F-Series Trucks
3
Mar 28, 2015 09:09 PM
warren561
1987 - 1996 F150 & Larger F-Series Trucks
1
Sep 12, 2013 08:39 PM
joshofalltrades
1968-Present E-Series Van/Cutaway/Chassis
17
Aug 11, 2012 03:34 PM
gmammakn
Excursion - King of SUVs
19
Jun 25, 2012 12:04 PM
Notmyranger
Explorer, Sport Trac, Mountaineer & Aviator
11
Feb 18, 2012 07:27 PM
