01 Excursion PSD

Just got my first Excursion from the auction got 162,000 miles. It looks like it blew a tire and hit the guard rail. Looks like it needs:

- 2 rims ( drivers front and rear wheels are bent)
- 2 front springs ( drivers side frt. of vehicle is lower than pass side) will just swap to v codes in the front
- drivers door might need to change or be repaired (sustained some damage and is out of alignment)
- 1 drivers side headlight ( will swap out both for 07's)
- 1 bumper ( will upgrade to 05 Excursion bumper and change to 05 grill at the same time
- 1 sway bar ( looks to be bent )
- 1 drivers side fender ( going to try and salvage flaring )
- body work drivers side ( might repaint the whole vehicle if funds permit)


Future Mod List:
- 285-315's /75/ on oem wheels ( powder coated black )
- 4 inch or less lift
- adj. Rancho shocks
- 2 tank SVO system
- SCT programmer
- big boost
- 4 inch TBE
- banks 4 inch down pipe elbow
- CAI
- 07 headlights w/ H.I.D.'s
- 05 Excursion grill
- 05 Excursion bumper
- safari roof rack w/ L.E.D. lights
- rear tire holder
- front skid plate bull bar w/fog lights

- Cummings swap CR or 12 valve with 5R100 trans ( if my power puff fails me)

That should be enough.

I need:
- v code and b code springs South Florida area
- 2 or a set of OEM Excursion rims
email me: zeenman1@gmail.com

<center>




</center>

 

Wow, looks like a fun project. Keep us posted!

 

Wow that looks like mine minus all the dents