Steering column
Thread Starter
|
New User
Joined: Oct 2010
Posts: 13
Likes: 0
Steering column
Got a steering column today from the jy. But it didn't have a key. I was thinking I could just switch the switches out. But can't figure out how to get the switch from the jy column out. Hoping I don't have to take this thing to a locksmith.
Freshman User
Joined: Apr 2011
Posts: 36
Likes: 0
From: So Calif
either locksmith or you can drive a large screwdriver in the tumbler you dont have key for and with a pair of vice grips or wrench on screw driver force the tumbler to turn and then you can depress the lock/pin at base of tumbler to remove the old one and then inseert you unit with keys back on column, Just had to do this to truck I kust got ddint have door or ignition keys so had to forceably remove and install new ones. Once you do it will scare ya how easy it is to steal these trucks
Moderator
Joined: Nov 2007
Posts: 22,415
Likes: 92
From: Denver Metro Area, CO
either locksmith or you can drive a large screwdriver in the tumbler you dont have key for and with a pair of vice grips or wrench on screw driver force the tumbler to turn and then you can depress the lock/pin at base of tumbler to remove the old one and then inseert you unit with keys back on column
Thread
Thread Starter
Forum
Replies
Last Post
T_Cooksey88
1973 - 1979 F-100 & Larger F-Series Trucks
1
Mar 17, 2016 11:23 AM
GM4WALLS
1973 - 1979 F-100 & Larger F-Series Trucks
1
Aug 30, 2015 07:09 PM
Jimmyrig
1973 - 1979 F-100 & Larger F-Series Trucks
1
Oct 31, 2013 10:46 AM
acw592
1961 - 1966 F-100 & Larger F-Series Trucks
2
Aug 29, 2009 04:00 PM
