column drop

Reply Subscribe

Thread Tools

Search this Thread

Apr 12, 2011 | 04:29 PM

MCarlson

Thread Starter

Senior User

Joined: Jan 2004

Posts: 299

Likes: 0

From: Mt. Home, ID

column drop

I finished my column drop today. I only needed two inches of drop wanted something a little different. The connecting rod I used is from an old 'Hercules' industrial motor. I cut it about an inch and a half above the big end and drilled a 1/4" hole through the beam. I cut two small 'L' brackets out of 3/4" angle iron and welded them to a flat piece of 1/2" stock about 5" long. I bolted it to the stock steering mount holes on the bottom of the dash with a piece of rubber in between for a gasket. Now on to the brake pedal.
Mike
The pictures are in my album and I'll to add them here.

https://www.ford-trucks.com/forums/p...02642726&thumb

Apr 12, 2011 | 04:35 PM

sdetweil

Hotshot

Joined: Nov 2000

Posts: 11,591

Likes: 14

From: Pflugerville, tx

very neat!..

haven't seen anything like that

Sam

Apr 12, 2011 | 05:13 PM

Moe Craig

Cargo Master

Joined: Sep 2010

Posts: 3,426

Likes: 48

From: Hot AZ (Phoenix Valley)

MCarlson,

That looks great... Great idea! and nice work...

Apr 12, 2011 | 05:56 PM

seanmconroy

Senior User

Joined: Aug 2007

Posts: 131

Likes: 0

From: Grande Cache Alberta

verry nice

That would look class if you got that chrome plated. Or even a lick of paint. Great job bud. Keep it comming.

Sean m Conroy
Grande Cache, Alberta

Apr 12, 2011 | 06:04 PM

MCarlson

Thread Starter

Senior User

Joined: Jan 2004

Posts: 299

Likes: 0

From: Mt. Home, ID

Thanks guys. Luckily my welding skills are blurred in the second picture.
I haven't decided on a finish yet. It actually looks pretty good as is. The truck will be cream and maroon. I still have to pick up a mount to use on the floor. At least it's starting to look more like a truck than just a big go-kart frame.