<!-- / icon and title --><!-- message -->previously posted on another board......Help!! started feeling a vibration on a 3.5 hr trip home a few weeks ago, was fine on the drive there, sat for a few hours and got in to drive home and as soon as i hit 85 km/h this vibration was felt by time i hit hwy spd at 110 it was shakin ***** outta the truck dropped speed down to 100 for rest of trip home. had tires rebalanced and vibration slowed down, let it go for a few days as i wasnt driving it much and the vibration started getting bad again. the tire shop said that they checked cv/ball/ujoints an wheel bearings. not sure it was done right in the first place..but now i have a knocking on the drivers front, when i turn right and it sounds like it did in september when i had the passenger side done, which was a knockin on turning left, im lost. there is almost no play in the driveshaft. ive checked a few other things, picked a few other brains to no avail.

 

I would look into replacing worn steering dampener and shocks

 

damper is on to get done for this weekend just waiting for hubby to bring home tools from his tractor an for part to come in which should be by the end of today. shocks were just done in october with munroe gas shocks

 

post back with the results from installing the new dampener but based upon your description a failed ball joint is suspect.

 

thank, will post follow up for sure. ball joint is what i was learning towards already. just ordering parts today for it an a couple of tools that grew legs an walked away last summer!