Towing package connections
Thread Starter
|
Posting Guru
Joined: May 2006
Posts: 2,486
Likes: 0
From: Iowa
Towing package connections
My 1993 Bronco appears to have the towing package, but i have some questions on what the factory towing harness looks like.
It apears i have 2 round 4 pin connectors in the rear of the truck. Are these the connections for the 7 Pin trailer connection?
Does ford just sell the compete harness that plugs into them?
It apears i have 2 round 4 pin connectors in the rear of the truck. Are these the connections for the 7 Pin trailer connection?
Does ford just sell the compete harness that plugs into them?
Fleet Owner
Joined: Oct 2005
Posts: 20,786
Likes: 1,751
From: Kentucky
I recall looking for that information several years ago. Long story short, yes there used to be a factory wiring harness to plug into those connectors. If it is still available I remember it was very pricey. A little work with a big soldering iron and universal connector kit worked fine for me for the last 3 '90s vintage trucks I have owned.
Elder User
Joined: Jan 2011
Posts: 884
Likes: 0
From: Rockport, IN
I just purchased a T-connector and the 7 slot RV style plug for my '92 F350. I got them from Trailer Hitches, Hitch Accessories, Hitch Wiring for a reasonable price.
Fleet Owner
Joined: Oct 2005
Posts: 20,786
Likes: 1,751
From: Kentucky
I should have mentioned I used the t-style connector for the brake/turn lights and the 7 pin RV connector as well. I cut the battery, ground and brake signal wires from the Ford connectors for use with the 7-pin. That is where the soldering iron comes into play.
Thread
Thread Starter
Forum
Replies
Last Post
johnEboy
Explorer, Sport Trac, Mountaineer & Aviator
4
Apr 20, 2008 12:34 PM
