Another D60 thread...Help!
Thread Starter
|
Posting Guru
Joined: Nov 2009
Posts: 1,569
Likes: 2
Another D60 thread...Help!
So i went to pick up a transfer case for the womans jeep today. And when i got to the guys place he had a few stroke parts. I saw a set of leaf springs and asked him about them. He said they were from his 03 F350 diesel. So i offered him 50$ and he took it. without knowing if they'd evern fit lol. Any idea what code they are? And if they will work? They V's? I want to do a RSK. I have 4" F350 rear blocks, and these springs. And ofcourse the d60. So what will my height be? Here's a pic of the spring code.
Elder User
Joined: Sep 2005
Posts: 971
Likes: 0
From: Melbourne FL.
I think with the RSK and SD leafs the front will rise 4.5" then you have to add the hight the D60 will add. When I didn't my D60 swap IT added around 1.5-2 inches in the front. so you are looking at about 6 inches from stock f250 ride height. make sure you look up what needs to be done when you use the SD springs on a OBS and RSK. Im not sure what all is needed but I know there are a couple of minor differences.
Thread Starter
|
Posting Guru
Joined: Nov 2009
Posts: 1,569
Likes: 2
Ugh..i really dont want 6 inches lift lol..now i dont think have to run SD springs in the rear also. I just see it as 6 inches upfront, and 4 inch blocks out back. lol reverse rake... Maybe ill stick with the SD springs and not do the RSK.
Laughing Gas
Joined: Dec 2005
Posts: 1,087
Likes: 189
From: Reno, NV
With a SKY 3" RSK, the D60, and those springs & 4" blocks your truck should sit perfectly level. Those are V codes... $50 is a good price!
You need the RSK to use SD springs. The SD springs are 3 5/8" longer than the OBS springs, and when mounting the RSK you need to move the
RSK hanger forward that amount.
Best thing to do is measure your stock wheel base and ensure you maintain that distance when installing your RSK.
If you havn't already bought your RSK, I highly recommend Cary @ CT Performance. He's the one that developed the RSK/SD spring mod and a bunch of other suspension mods for the OBS, SD, & Excursions. He's a good guy to do business with. He goes by Caryt or OBSWIZ on the forums.
You need the RSK to use SD springs. The SD springs are 3 5/8" longer than the OBS springs, and when mounting the RSK you need to move the
RSK hanger forward that amount.
Best thing to do is measure your stock wheel base and ensure you maintain that distance when installing your RSK.
If you havn't already bought your RSK, I highly recommend Cary @ CT Performance. He's the one that developed the RSK/SD spring mod and a bunch of other suspension mods for the OBS, SD, & Excursions. He's a good guy to do business with. He goes by Caryt or OBSWIZ on the forums.
Laughing Gas
Joined: Dec 2005
Posts: 1,087
Likes: 189
From: Reno, NV
Yes, you have to grind off the bumper mounting tabs & reinstall them after the RSK hanger is installed. You'll need to either shim the bumper out using big washers or notch it to clear the RSK hanger. I did a little of both so it would clear my 35's but still look fairly stock.
Thread Starter
|
Posting Guru
Joined: Nov 2009
Posts: 1,569
Likes: 2
Trending Topics
Elder User
Joined: Sep 2005
Posts: 971
Likes: 0
From: Melbourne FL.
With a SKY 3" RSK, the D60, and those springs & 4" blocks your truck should sit perfectly level. Those are V codes... $50 is a good price!
You need the RSK to use SD springs. The SD springs are 3 5/8" longer than the OBS springs, and when mounting the RSK you need to move the
RSK hanger forward that amount.
Best thing to do is measure your stock wheel base and ensure you maintain that distance when installing your RSK.
If you havn't already bought your RSK, I highly recommend Cary @ CT Performance. He's the one that developed the RSK/SD spring mod and a bunch of other suspension mods for the OBS, SD, & Excursions. He's a good guy to do business with. He goes by Caryt or OBSWIZ on the forums.
You need the RSK to use SD springs. The SD springs are 3 5/8" longer than the OBS springs, and when mounting the RSK you need to move the
RSK hanger forward that amount.
Best thing to do is measure your stock wheel base and ensure you maintain that distance when installing your RSK.
If you havn't already bought your RSK, I highly recommend Cary @ CT Performance. He's the one that developed the RSK/SD spring mod and a bunch of other suspension mods for the OBS, SD, & Excursions. He's a good guy to do business with. He goes by Caryt or OBSWIZ on the forums.
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
Top 10 Ford Truck Tragedies
Joe Kucinski
AEV FXL Super Duty - the Super Duty Raptor Ford Doesn't Make
Brett Foote
Lobo Vs Lobo: Proof the F-150 Lobo Should Be Even Lower!
Michael S. Palmer
Ford's 2001 Explorer Sportsman Concept Looks For a New Home
Verdad Gallardo
10 Best Ford Truck Engines We Miss the Most!
Joe Kucinski
2026 Shelby F-150 Off-Road: Better Than a Raptor R?
Brett Foote
2027 Super Duty Carhartt Package First Look: 12 Things You NEED to Know!
Michael S. Palmer
10 Most Surprising 2026 Ford Truck Features!
Joe Kucinski
Thread
Thread Starter
Forum
Replies
Last Post
76f350spercamprspeal
1948 - 1956 F1, F100 & Larger F-Series Trucks
42
Feb 5, 2011 01:24 PM
jman99
1973 - 1979 F-100 & Larger F-Series Trucks
9
Jul 5, 2010 11:00 PM
inlandsurf
1961 - 1966 F-100 & Larger F-Series Trucks
6
Jan 20, 2009 10:29 PM
