**** MARCH CHAT THREAD ****
Thread Starter
|
FTE Legend
Joined: Jul 2005
Posts: 65,938
Likes: 1,432
From: Millersville, MD
WOW.... don't step on the scales....just drive down to Veterans Hwy and climb on the CAT ones!
FTE Legend
Joined: May 2008
Posts: 56,542
Likes: 0
From: In my own world
FTE Stories
Ford Trucks for Ford Truck Enthusiasts
Top 10 Fords at 2026 Carlisle Ford Nationals
Joe Kucinski
3 Best / 3 Worst Parts of Modern Ford Ownership
Brett Foote
10 Amazing Upgrades That Solve Common Ford Truck Owner Headaches
Pouria Savadkouei
Every 2026 Ford Engine Explained
Brett Foote
10 Ugly Ford Trucks That We Still Kinda Love
Joe Kucinski
10 Things Every Truck Owner NEEDS (2026 Edition)
Michael S. Palmer
Rezvani's Latest Post-Apocalyptic Monster Is a Ford F-150 Raptor Underneath
Verdad Gallardo
Top 10 Most Expensive Ford Trucks Ever Sold on Bring a Trailer
Joe Kucinski
2027 Ford Super Duty Buyer's Guide (Every Model, Engine, & Package)
Brett Foote
FTE Legend
Joined: May 2008
Posts: 56,542
Likes: 0
From: In my own world
if the intake and plenum on the 94 roller motor will work with the gt40 heads. the ones I'm looking at are actually gt40p heads, the spark plugs are straight into the head instead of angled, headers will take care of that, but the plenum on the gt40 motor is smaller chamber that the 5.0 roller motor. I want to use the big plenum and throttle body on the big heads. I guess I explained that right, idk
FTE Legend
Joined: May 2008
Posts: 56,542
Likes: 0
From: In my own world
yeah, probably going to post it in the high preformance build thread. Jr is firmiliar with the heads, but only if used with a carb. looking for more flow= better gas milage, if I'm going to rebuild it, might as well make it better
FTE Legend
Joined: May 2008
Posts: 56,542
Likes: 0
From: In my own world
night Bud..... watch them cheeks when doc says bend over and touch your toes.................