What trans ?!?! SWAP help
Thread Starter
|
Lead Driver
Joined: Jun 2006
Posts: 5,701
Likes: 1,025
From: Near Yosemite CA
What trans ?!?! SWAP help
Ok,,, I have a 79 F250 4x4 with the 300 I6 and NP435,,, I am looking at a friends 83 or 86 F250 Diesel 4x4 with 4 speed,,,, what tranny might this be, and what bell housing would bold up to the NP435 for the 6.9 swap, or what would be the best way to swap the 6.9 into my 79?!
Thanks
Joe
Thanks
Joe
Moderator
Joined: Jan 2001
Posts: 57,023
Likes: 2,754
From: Virginia
If it's the original tranny on the diesel, it should be the t19. I believe all the Ford 4 speeds interchange.
But the diesel will have a hydraulic type bellhousing, so you will have to deal with putting the hydraulic clutch system in your 79.
But the diesel will have a hydraulic type bellhousing, so you will have to deal with putting the hydraulic clutch system in your 79.
Thread Starter
|
Lead Driver
Joined: Jun 2006
Posts: 5,701
Likes: 1,025
From: Near Yosemite CA
Upon thinking about it,,, I guess I should have asked also,,, does the 6.9 share any bellhousing sizes/bolt patterns? I am trying to do some searching, as far as swapping into the 79,,, what it needs wiring wise and such.
Thread
Thread Starter
Forum
Replies
Last Post
lenrsmith
Clutch, Transmission, Differential, Axle & Transfer Case
12
Mar 3, 2004 01:53 AM
ChadR93
Clutch, Transmission, Differential, Axle & Transfer Case
3
Nov 29, 2001 05:31 PM
