great job!

 

I have the info from the two websites on hooking up the prop valve. What I don't see or missed is where this new master Cylinder has two lines coming out. The instructions see to only show the one line for from master cylinder. Am I misreading it ? Any info here would be a great help, hoping to get at the plumbing today.

 

did you see the pic of the porp valve in Dwight's write up? (its a drawing) it shows where both lines go.

f100discs

 

Bobby, Can I ask you a question? Why wouldn't you hook it up zackly like it was on the donor?

I did.




John

 

Ditto you are correct, overlooked it as usual LOL. thanks

John
the MC lines had already been snipped and the drvr side hose bracket was hanging free. I suspect someone else had the same plans a day or so before and intended to come back with the right tools Sat AM on 1/2 price day to drag it all home. We got there before the worms were awake

Think we'll be able to wrap this up and get a feel for the outcome before end of week. Almost called in sick today But alas $$ isn't sprouting on the fruit trees out back so, it's off we go to make some dough..

The camber concern posted earlier in the thread does have me concerned, as I don't know if there is a local guy who can do an alignment without a computer. Lotta fkn good thats going to do you when the power is out. [Sorry sir i can align your front end cause the computers are down.] LMAO!! Whatever happen to a yellow pad and a pencil/ slide ruler, common sense and dignity to take advice from an elder/ that wont require a battery or LoCal Edison to bring to life. And so it goes.. just the same here we are enjoying the priceless internet where not only can i learn/share "I can rant" LOL!! Cheers Folks!