pcv port loaction
Thread Starter
|
New User
Joined: Oct 2010
Posts: 2
Likes: 0
pcv port loaction
any idea where the pcv plugs into to. there are no open vac ports on the carb. the spacer has one port thats used by the brake booster. there is a pipe plug below the spacer in the intake mainfold itself. could that be it.
Thanks
Thanks
Junior User
Joined: Sep 2010
Posts: 89
Likes: 1
From: California
where to find source for PCV vacuum
You want full manifold vacuum. If there is a plug as you said on the intake manifold...perfect. Either a bone yard, parts store or better yet a home improvement place (depot or lowes), find the brass fittings and buy one with a single nipple (usually 1/2 i.d.) and at a right angle. Be sure to use some teflon tape.
Thread
Thread Starter
Forum
Replies
Last Post
hooler1
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
3
Feb 28, 2015 09:08 PM
gysgtbigdaddy
Y-Block V8 (239, 272, 292, 312, 317, 341, 368)
6
Aug 22, 2014 08:13 PM
andrewscofield
1973 - 1979 F-100 & Larger F-Series Trucks
14
Apr 9, 2013 08:56 PM
cbass139
1948 - 1956 F1, F100 & Larger F-Series Trucks
13
Mar 7, 2010 09:37 AM
