backup camera wiring?
Thread Starter
|
Senior User
Joined: Nov 2000
Posts: 450
Likes: 2
From: Dallas, GA
backup camera wiring?
I've got the Sony Nav system in my '09 FX4 and I'm looking to add the backup camera that is hidden in the ford emblem on the tailgate. Can anyone tell me what to look for to see if my truck has the necessary wiring running from the cab to the back of the truck to support the camera? I know that I will need the wiring from the camera to the junction point below the tailgate, but not sure on the remainder of the wiring.
I also know that I will have to go to the dealer once the camera is installed to have them turn the camera on in the Nav system.
Thanks.
Bryan
I also know that I will have to go to the dealer once the camera is installed to have them turn the camera on in the Nav system.
Thanks.
Bryan
New User
Joined: Nov 2010
Posts: 2
Likes: 0
I am also in the process of trying to do this on my 2010. I fortunatley work at a Ford dealer and hope to have answers soon. I have already checked the software and hardware numbers from one identiacl to mine with back up camer and parking aid sensors. The parts, including the smart junction box are the same. I just need to get some time to get it on a lift and check the wiring out. Additionally if it works I will need to pull as-built data from the other truck and down load it into my sjb.
Thread
Thread Starter
Forum
Replies
Last Post
afhanson72
1999 - 2016 Super Duty
4
May 26, 2016 01:58 PM
