Looking for a FE builder?
#1
Looking for a FE builder?
I have a great block (I think) for building a stroker, but also realize that I do not have the intimate knowledge of these motors to do it. Is there somone in our area that know's how to build these motors that might be interested in helping with a build? I am not really looking for someone to just take it and do it themselves, but rather to provide help in critical aspects.
I just cracked open a stock 360 motor that I found in Oregon that has never been touched. It is a "mirror" 105 with a D3TE code. I would like to punch this out to either a 410 or a 445. Thanks in advance.
I just cracked open a stock 360 motor that I found in Oregon that has never been touched. It is a "mirror" 105 with a D3TE code. I would like to punch this out to either a 410 or a 445. Thanks in advance.
#2
...then again, that is how we got to know the M16 well back in the bush.
...and Happy Veteran's Day.
#6
Of course it was not helpful... your thread just sat here with no one responding, was hoping that if it showed a little interest others would chime in. Apparently no one yet has anything that is meaningful to actually help you, but a sense of humor does go a long way.
#7
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
GrabAnotherGear
Performance & General Engine Building
6
06-28-2011 09:12 PM