f250 no start

Reply Subscribe

Thread Tools

Search this Thread

Nov 9, 2010 | 06:06 PM

topdawgtrkr

Thread Starter

New User

Joined: Feb 2009

Posts: 10

Likes: 0

f250 no start

over the summer i did a frame off, new cab and frot clip have it together and will not start, have all the power in the cab, lights , blinkers horn ect push the clutch in turn the key and nothing. i have checked all the grounds, replaced solenoid switch and got the same results. i am at a loss, ug

please help. thanks

Nov 9, 2010 | 06:14 PM

nobearsyet

Tuned

Joined: Nov 2010

Posts: 256

Likes: 0

From: amarillo TX

is the clutch pedal interlock switch set right? if it isn't then the pedal isn't telling the computer to let it start, easy way to check is to jump the switch, then I'd leave it jumped, I never liked the interlocks anyways.

Nov 9, 2010 | 06:25 PM

topdawgtrkr

Thread Starter

New User

Joined: Feb 2009

Posts: 10

Likes: 0

switch

ok and how do i bypass that switch?

Nov 9, 2010 | 10:51 PM

nobearsyet

Tuned

Joined: Nov 2010

Posts: 256

Likes: 0

From: amarillo TX

Unhook the wires from the switch, connect them together, see if it starts, if it starts you found your problem, if it doesn't start, try the starter solenoid on the fenderwell