Guage Problems again
Thread Starter
|
Senior User
Joined: Dec 2009
Posts: 267
Likes: 0
From: Alvin, Texas 77511
Well the guages are working again in the 52 ford. I did what you told me to do with taking the wires off and trying them one at a time. Then I took the tool box off the top of the gas tank and I think it was shorting out through the sending unit. everything worked after I did that. I put some electrical tape on top of it and all around the screw put the tool box back on but raised it a little. Anyway we are back on track.
Thanks for all the help and information ya'll have given me once again.
Thanks for all the help and information ya'll have given me once again.
Thread Starter
|
Senior User
Joined: Dec 2009
Posts: 267
Likes: 0
From: Alvin, Texas 77511
Yes I think that the sheet rubber is a great idea as soon as I can find an old intertube I will do just that. All I have now is electrical tape and I know it will probably rub through in time. But at least the guages are back working for now which is great.
Thread
Thread Starter
Forum
Replies
Last Post
