Not sure of the technical name but I need the plastic or vinyl or whatever they are made of sleeves that go on the stud in the door jamb that catch the locking mechanism in the door. What's the name, anyone have a part #, and where are they available?

Thanks

 

You need the door striker pin bushings. Although most parts houses sell the whole striker pin assembly. I have found a package of 4 bushings for the tail gate I think they were for, that the smaller size worked. It is less hassle to just get the entire striker pin. Door Striker Pin 80 91 Ford E Van F Series Pickup Bronco 82 92 Mustang Used | eBay

 

You can also get them at Autozone with all the "Help" stuff. Replaced 3 of mine within the past year as the plastic part fell off. Had to work a little to get them adjusted correctly.

 

the neighbor had a beater 91 that i wrapped electrical tape around the pin until the door was tight. .held for the year he had it after the repair when he sold it.

 

Over the years I have done mine several times and like echo95 stated you can get them in the help section in most parts houses

 

Got some. Thanks guys.