A few years ago someone stole a bunch of parts off my truck while in storage. They attempted to take the NP205 transfer case but gave up.

I am missing the large hold down bracket bolt in the below picture. Anyone know where to get another or what the original looked like? (Truck is 1978 F-250 4x4, single cab)

 

A bolt with a sleeve is it. I guess I can measure mine and post if no one beats me.

 

1/2" fastener about 3.25" long with big *** washer............

 

See upper right in pic:

385699-S .. Bolt: 9/16" -12 x 3 1/4" long / Obsolete

NOS PARTS LTD in Waxahachie TX has 1 = 972-937-2201.
-----------------------------------------------------------------
6A027: C6TZ-6A027-A .. Spacer / Obsolete

NOS PARTS LTD has 5.

 

Agreed........9/16" and there is a steel sleeve around the bolt inside the rubber mounts to keep from just crushing the rubber......will only allow the bolt to be tightened so much......big washer on the bottom........

 

Thank you so much. This is great info!!! I will send an update.