Free to FTE member in need!I have 2 good rear ends 1 is from my 56 f600 with 42k miles I put new wheel cyl. on it but then pulled it out when I found a 2sp I have now pulled the 2sp and replaced it with dana 80 with 3.31 axle ratio. Both have the square housing and six lug bolt pattern .... 1 is a rockwell with 6.80 ratio the 2sp is an eaton 15200 series with 6.33/8.81 ratio Note: they are currently listed on craigslist (but not for free) I would like to see them get a good home .... I'm in morgan hill ca. pm with a phone # and I'll call you
what are the ratios on the 2 spd if you don't mind my asking.
the 2sp is an eaton 15200 series with 6.33/8.81 ratio
He indicated it in his message!
1955 F-600/292Y/E4OD // D I S C L A I M E R: No animals were injured while test driving my F-600 except the ones I RAN OVER INTENTIONALLY!!!
2005 6.0L F-350 4x4
I have had my hands on Cessna, Northrup, Lockheed and McDonnell Douglas throttles. I still handle Boeing throttles and Convair (Consolidated Vultee).
rustyrelic at least deserves some rep points for his offer
- art k. - Moderator for the Superduty, V10, 6.2L and FE forums
'13 Taurus SHO 3.5L Ecoboost w/Perf Pkg
'01 F250SD SC SB XLT V10 4x4 Volant CAI Hedman headers 5-star custom tunes on SCT X3
'97 Cougar XR7 30th Anniv Edition 4.6L
'74 F250 Highboy FE390 deceased! I've been wrong before, I'll be wrong again. Just wait and see. ®
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. Ford® is a registered trademark of the Ford Motor Company.