You are currently viewing our forum as a guest, which gives you limited access to view most discussions and access our other features. By joining our community, at no cost, you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is free, fast and simple, so please join our community today!
I plan to trump my very own Bosses ace by building up a drag truck with a Ranger II chassis, and the engine you see below once it is cleaned, modified, and bullet proofed for short tracks (1/8 mile).
It might take a while - the progress on this project will be documented in the TN chapter but you can follow it as we go.
- You want to be careful of "PROFILING". There's a reason the eighth mile is important... It fine-tunes launches and reaction times so that the quarter is a whole new ballgame.
__________________
Think outside of the box - especially if you built it yourself
i live within 2 hrs of maple grove, englishtown, atco, MIR, capitol, cecil, and delmar is my local 10 min away
and i know all about the 1/8th its the first thing i look at on my slip that and my 60'...your preachin to the choir here...i also run a turbo car so the big end on the 1/4 is important to me...and my 60's are generally 1.6 on street tires so i know all about tuning...
This forum is owned and operated by Internet Brands, Inc., a Delaware corporation. It is not authorized or endorsed by the Ford Motor Company and is not affiliated with the Ford Motor Company or its related companies in any way. FordŽ is a registered trademark of the Ford Motor Company.
