Can anyone give me the dumbed down answer to these two codes, I have the superchip manual and it gives P1211: ICP not controllable-pres above/desired. P0603: Internal Ctrl Mod KAM error. The truck is a 03, 7.3L auto running on max setting with pryo, boost and trans gauges and a 4" exhaust.
I guess the real question is am I damaging the truck when the engine light comes on. (Pryo stays resonable cool, 425c post trubo)

Thanks Mick

 

Can anyone give me the dumbed down answer to these two codes, I have the superchip manual and it gives P1211: ICP not controllable-pres above/desired. P0603: Internal Ctrl Mod KAM error. The truck is a 03, 7.3L auto running on max setting with pryo, boost and trans gauges and a 4" exhaust.
I guess the real question is am I damaging the truck when the engine light comes on. (Pryo stays resonable cool, 425c post trubo)

Thanks Mick

 

just about anytime you add a tuner or programmer to the 7.3 psd those codes will come up...dont worry about them as long as the truck is running ok. simple enough

 

Neither one are a problem, both are set by the programmer. No damage is being done.

800f post turbo is not bad, what's the boost doing when the CEL comes on?

 

Threads merged.