1991 5.8 stock engine specs?
#1
11-20-2004, 07:26 PM
Join Date: Sep 2003
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
1991 5.8 stock engine specs?
I want to plug some numbers into Virtual Engine Dyno, but I need specific info on the stock setup to begin....does anyone have the stock specs? Im looking for any of these figures...
Camshaft - Intake duration, Exhaust duration, Intake centerline, Lobe seperation
Heads - Intake port cc, chamber cc, intake valve diameter, exhaust valve diameter
Pistons - Dome CC, compression height
I know this is not the program most people seem to use, but I paid for this one long ago and it IS pretty easy if you have the critical info. Who knows, maybe someone uses this program and has a file they could send me?
Any info would help a bunch......Thanks
Camshaft - Intake duration, Exhaust duration, Intake centerline, Lobe seperation
Heads - Intake port cc, chamber cc, intake valve diameter, exhaust valve diameter
Pistons - Dome CC, compression height
I know this is not the program most people seem to use, but I paid for this one long ago and it IS pretty easy if you have the critical info. Who knows, maybe someone uses this program and has a file they could send me?
Any info would help a bunch......Thanks
Thread
Thread Starter
Forum
Replies
Last Post
jgan
1973 - 1979 F-100 & Larger F-Series Trucks
2
06-15-2010 08:09 PM
76 F150 Ranger XLT
FE & FT Big Block V8 (332, 352, 360, 390, 406, 410, 427, 428)
18
10-08-2004 05:46 PM
umdstang
Small Block V8 (221, 260, 289, 5.0/302, 5.8/351W)
8
03-23-2004 09:19 PM
DeGideo
Big Block V8 - 385 Series (6.1/370, 7.0/429, 7.5/460)
4
07-17-2003 06:57 PM
