My buddy has a '95 F-150 that he would like to throw a straight axle under. Does anyone besides Fabritech make the conversion kit for this? I know he doesn't want to spend that kind of money on this. I'm sure you guys know of someone out there!

 

There is a thread on this somewhere here. A friend did it on an 85 F150 with a junkyard 79 F150 D44 using the 79 radius arms and brackets. He also used some steering parts from a 87-97 F350 I think. His truck also already had a 6 inch lift and he reused those springs but lost about an inch in the swap. I'll talk to him later this week and see if he can remember exactly what he used.

 

I wrote up the parts list for this, do a search in this offroad forum punch up "sas".