My 77 F250 isn't getting fire past the coil. Coil is good and getting 12V but no fireing signal. I an guessing its the ignition module. Since I don't have a schematic to figure out which wire should do what, I will just throw a new one at it.
The old engineering # is D6AE 12A199 A1B
MOTORCRAFT blue grommet
Wires 4 plug Purple, orange, black/green and green
Wiers 2 plug Red and White


Looking for NOS Thanks

 

1U2Z-12A199-AA (replaced D6AZ-12A199-A & B and D9VZ-12A199-A) .. Ignition Module - Blue grommet (Motorcraft DY-893) / Available from Ford.

But, it could also be this: D4PZ-12A112-A .. Stator aka Magnetic Pickup Coil (Motorcraft DU-1A) / Available from Ford.

ALL 1974/79 FoMoCo V8 vehicles except 1979 LTD/Grand Marquis 351W

 

Thank you. Yes plenty DY893's available. I am hoping to find a NOS one. Do you know who might have one?

 

D6AZ-12A199-A =

GREEN SALES CO. in Cincinnati OH has 35 = 800-543-4959.
--------------------------------------------------------------------
D9VZ-12A199-A =

MUSTANG'S ETC. in Van Nuys CA has 1 = 818-787-7634 (Be prepared for 'sticker shock!').

KAMA OBSOLETE PARTS in East Bethel MN has 1 = 763-434-0123.

 

Thanks I'll check with them.
I appreciate your willingness to help.